|
|
1. Mark draws the rocker template on the balsa sticks
|
2. Then Mark cuts out the rocker
|
3. After he's finished, Mark has 5-7 balsa sticks with the same rocker
|
4. Now Mark cuts out the amount of stringers he needs for the board.
|
5. Now Mark lines up the sticks and stringers and glues them up
|
6. This is the raw blank which you can start shaping now.
|
Making solid balsa wood surfboards
Balsa wood surfboards - shaping: Finally an instructional DVD on how to make your own solid balsa wood surfboards is out.
Sit back and relax while renowned Australian shaper Mark Riley shares his secrets of making a solid balsa wood surfboard with you. Covering everything from selecting the wood to ready for glassing, this 65min DVD won't leave a question unanswered.
Chapters include:
1. Tools & Safety
2. Balsawood – selecting the sticks
3. Rocker template
4. The Glue up
5. Stringers
6. The Plan shape
7. Rocker Clean up
8. Nose & Tail Block
9. Wood Imperfections
10. The Finish Plan Shape
11. The Rails
12. Final Sand & Sealer Coat
The DVD also includes written instructions that take you through the process set by step.
When you purchase this DVD there will be an individual code on it. As soon as you're ready to purchase your balsa wood or blank, let us know your code and get a $30 discount!
OUT NOW!
Please note: The youtube video below is a trailer and contains only snap shots from the actual video – the video is filmed live and runs for 65 minutes.
|
|
|
|
|
|
|
|
